Framing Canada

Frames are more than just structures holding up your homes and buildings. It’s also important to mention that we’ll insulate the space, provide wiring support and help with ventilation to make sure you don’t get overheated. Without frames, your home would not have any protection if it were to be hit by a natural disaster such as an earthquake or tornado.  
Our framing services have been used to build homes, schools, retail stores, and more. We offer a variety of residential and commercial framing services to suit the needs of our clients.
Residential and commercial framing services are essential for any type of construction project. We will take care of the installation and building, so you can focus on the design. No matter what type of project you’re working on, we have a solution to suit your needs.
Our framing services are essential to any type of construction project. We provide installation and building, so you can take full attention on the design. For any framing you need, we’re sure to have it here in our showroom!

In this way, we provide different types of lumber to suit the customer’s needs and requests. For example, Douglas Fir is a strong wood with minimal cracking and is best used for posts & beams. Alder is a soft wood with an attractive grain pattern that is good for interior work. White Cedar, so called because of its color and grain pattern, is a popular choice for shingles, siding and decorative items.  The wood that is easiest to work with continues to be the most popular. For example, pine and basswood have become more in demand for high volume production due to their ease of use and lower cost.

Types of lumber:

Eastern White Pine is a relatively soft and inexpensive lumber that is easy to work with and can be used for construction and framing purposes. The wood has a straight grain and porous, soft texture that allows nails to easily penetrate it. It has a moderate working ability, with good bending and knot-free strength properties. The wood is difficult to saw and mill, with a tendency for split-takes and tear-outs. Western White Pine is slightly harder than Eastern White Pine but can still be used for construction purposes. Red Oaks are also inexpensive and easy to work with within the framing but are prone to decay.

White oaks are the opposite of red oaks as it is hard and has a high shrinkage rate and suitable for framing.
The white oak tree is the opposite of a red oak tree because it is hard and has a high shrinkage rate, making it suitable for framing.
We will also provide our clients with detailed reports, videos of the construction process, and photos of the project’s completion. For more information, you may go to their website Universal Framing Carpentry, or call them at 416-890-4542.
What other services offered by the company?
Here at our company we are proud to offer a wide range of services that can cater to all of your needs. Here is just a brief list of some of the services our company provides:

Custom House Framing
At Universal Framing Carpentry, we understand the importance of building a custom home that is uniquely yours. Our knowledgeable and friendly framers will happily assist you in this process which is not only easy but enjoyable. .Our project management team will provide you with feedback on the design and our custom framing specialists will help you make choices for your interior and exterior finishes, hardware, and millwork. For more details go to Universal Framing Carpentry website or give them a call at 416-890-4542.

New Addition Framing
When you are looking to add new rooms to your home, we can help by providing a range of framing options that match your needs perfectly. If you’re looking to add or extend your home, we can help you make it a reality by framing and adding additional rooms to your home. Our skilled and experienced team of builders can provide a selection of framing options that to suit your needs. If you’re looking for a professional company to help with any building works, the experts at Universal Framing Carpentry are here to help. For more information, visit Universal Framing Carpentry, or call them at 416-890-4542.

Remodeling your home is more expensive than you think. Adding framing to any room can be pricey, regardless of what material we use, how we want the room to look and how big or small the individual pieces will be. . If you do decide to remodel, make sure you plan ahead and consult a reputable contractor who will ensure the job is done correctly.  During the planning process, make sure you look for replacement windows. This is a great way to save money on remodeling and get what you want without having to worry about additional costs. For more information, visit Universal Framing Carpentry, or call them at 416-890-4542.

Structural Framing
Structural home framing is the process of building a home on a foundation. The builder decides where the house will be located on the property, and builds the foundation before any other part of the house. The structural frame includes columns, beams, posts and walls that provide support for both load bearing and non-load bearing walls.  The structural frame also includes the floors, interior walls and ceilings. The structural design of a house is a multifaceted function that often begins long before the start of construction. This process usually starts with an architect who designs the floor plan, elevations and site plans for the proposed building. The structural engineers then take this information and use it to determine what size materials and building techniques will be necessary. Once the structural engineers have determined all of the necessary pieces, they create a set of engineering drawings called constructions plans that are then approved by the architect and owner before being sent to the construction crew. For more information, you can take a look at Universal Framing Carpentry website or reach them at 416-890-4542.

All of these services and more are provided by Universal Framing Company. They proudly provide their services in the following locations:
Richmond Hill
King City
North York

Framing Basement Walls in Ontario

What is it?
The process of building a basement starts with the framing. The process of framing basement walls Ontario is the process of making a frame for your foundation. After you have made your frame, you will then start filling it with concrete. When the area is finished, it looks like a basement wall that goes up to ground level on one side and finishes just below grade or near the ground on the other. If you want to build a basement, you will start by tearing up the ground where you want your new basement to be and burying your beams. You can use a hammer drill for this task so that it goes quicker. Once your entire infrastructure is complete, you have started building with concrete.
Framing basement wall in Ontario is often an essential project that homeowners undertake as it helps ensure the security of the household. To ensure this, it’s important to have a good foundation, which can be achieved by constructing foundation walls.
What are benefits?
There are many benefits to framing basement walls. Framing the wall will make it stronger, provide insulation and help prevent water from seeping through the foundation. It also makes the space feel more open and bright. The room is also more structurally sound by framing it, so you don’t have to worry about water getting in through the walls or into the basement. If you decide to use wood, make sure to use a non-toxic material with natural preservatives and paint it before installation. Since wood will deteriorate over time and needs structural support, make sure to provide adequate framing.

What are requirements for framing basement walls?

A few requirements for framing basement walls are that the material used should be moisture-resistant, mold-resistant and not absorb water. The framing is required to be 2×6″ or 2×8″ lumber, spaced 16″ on center. The top plates should be nailed to the joists with 16d nails. At 8″ (2×8) or 12″ (2×6) spacing, which is the minimum required distance. The bottom plates should be nailed to the joists with 16d nails at 4″ (2×8) or 6″ (2×6) spacing. When covering a basement floor, remember to cover all joists, and leave no exposed wood.
What is the cost of framing basement walls?
If you are looking to frame basement walls, the cost will vary depending on the materials you use. You can expect to pay anywhere from $2-$6 per linear foot, but this really depends on how much of the wall is exposed and how much framing needs to be done. .If you are looking to paint basement walls, you might be able to get this done for as little as $50. If the room is far from any electrical outlets, the cost will be higher because of the need to use extension cords. It will also depend on how long it takes for the electrician to arrive and do their work.

For more information about framing basement walls, take a look at Universal Framing Carpentry website or contact them at 416-890-4542.

Framing Interior Basement Walls in Toronto

There are a lot of different ways to frame an interior basement wall depending on the type of foundation you have. Some foundations are built with a concrete slab, which can be finished off with drywall and painted. Framing interior basement walls in Toronto can be a daunting task. Other types of foundations may only require you to use cement boards, which can also be finished off with drywall and painted. For a concrete slabs, one option is to use cinder blocks set up with headers and tie downs. This can make it easier to build the wall using standard drywall, or you could choose to install a concrete block wall. You will need some plywood for the bottom layer of the foundation on top of the block walls before you can put up dry wall. For a foundation with concrete blocks, you will need to build a frame of steel or wood while putting up the block walls before installing drywall and paint. You could also choose to install two-by-four studs set on edge, then finish the walls off with drywall and paint.
What are benefits of framing interior basement walls?
Here are a few benefits to consider when you’re framing your basement walls. You can easily match the basement wall framing to the exterior wall framing, making the two frames look beautiful when combined. Your walls are framed to fit your floor joists and your foundation sill plate, which is stronger than a batter or wafer plate. You’ll have a much stronger frame on both sides of the walls, which will help protect the walls from any demolition or floor collapse during a renovation.

What are requirements for framing interior basement walls?

The construction of the interior walls in a basement can be quite challenging. For one, there are many different considerations, such as whether to insulate the walls or not, how thick to make the studs, and what type of insulation to use. There are also questions about what type of studs to use (standard or heavy-duty) and how to frame the drywall with both design and insulation in mind. It can be a tricky situation, but the following guidelines will make it much easier to approach. What Type of Insulation Should Be Used? There are three standard types of insulation materials: fiberglass batts, mineral wool batts, and cellulose insulation. The amount of heat that a particular insulation material is able to hold may vary depending on the type of insulation and on how that particular material is constructed. The term R-value refers to the resistance of a material to heat flow, and higher numbers indicate better heat retention. A good rule of thumb is that cellulose insulation holds the least amount of heat, mineral wool batts hold about half as much, and fiberglass batts hold twice as much.

For more information about Framing interior basement walls, you can refer to Universal Framing Carpentry website or call 416-890-4542.

Framing Basement Ceiling in Toronto

What is framing basement ceiling?
The framing of a basement ceiling in Toronto is different than the framing of a regular room. The basement ceiling framing typically consists of two beams that span the width of the basement and are supported by vertical columns. Steel joists are then nailed to these beams and connected to the basement walls using metal hangers, or by nailing to the concrete foundation. The basement ceiling framing is often ignored in construction plans, which can lead to a structural problem if not addressed.  A lot of people call the framing in a basement ceiling a rafter. , but this frame is typically a different construction.  A rafter is typically a joist that is supported by walls or roof framing. The frame of the ceiling construction goes up to the top of the rafters, and ceilings with a single layer of frames typically do not include a rafter.

What are requirements for framing basement ceiling?
The best way to go about framing basement ceiling is that you need to make sure that the joists span out in the direction you want them to go. The next step is to locate the outside wall and then mark the location of each joist on it. This will tell you what height your basement ceiling should be for your joist work. Make sure that the joists are not contacting the outside wall and you have your measurements. Now take a framing square and place it on the joist so that it spans out to both sides. On one side of your square, mark the depth of your basement ceiling (measured from top to bottom). On the other side, mark out both edges to see how far they should be. The depth of your basement ceiling on the inside side of your square should be the same as the depth at which you want your ceiling joists to sit on top of each other. On the outside side, make sure that both edges are in proportion to each other so you have a balanced ceiling frame.

How much does it cost for framing basement ceiling?
If you’re looking to frame a basement ceiling, you’ll need to factor in the cost of framing materials, labor and any permits or inspections needed. The cost of these items can vary considerably depending on the size of the basement ceiling, so it’s important to get a quote from a framing contractor first.

For more information about framing basement ceiling, you may refer to Universal Framing Carpentry website or contact them at 416-890-4542.

Hits: 19

9 replies
  1. Elton C. Robinson
    Elton C. Robinson says:

    I needed some framing done in my home and I called this company to come over and make measurements. They were quick and responsive, answered my questions thoroughly, and offered a lot of advice on how to get the best price – they charged me a fair price for the work that was done!

  2. Benjamin K. Gray
    Benjamin K. Gray says:

    I really enjoy working with universal framing. I am always surprised at how quickly they are able to get the job done. Their price point is lower than their competition and the customer service is top notch!

  3. Ramon J.
    Ramon J. says:

    Most other framing companies charge per hour for their work, this company charged us a flat fee for the framing job they did for us. This is the best option if you’re looking to save time and money.

  4. Patrick B.
    Patrick B. says:

    I did a lot of research on the company before hiring them to frame my basement. They were the most affordable company the easiest to work with.

  5. Adam J. Aleman
    Adam J. Aleman says:

    I was able to successfully frame my basement walls with the help of Framing Carpentry. I was pleased with the quality of work and professionalism of their staff.

  6. Laverne D. Archibald
    Laverne D. Archibald says:

    I had my framing basement ceiling in Toronto installed by Universal Framing Carpentry. They just finished it and I am so impressed! The whole team was professional and courteous, they made sure everything was done completely without any delay. The best part is that their prices were very competitive.

  7. Ronald Godinez
    Ronald Godinez says:

    I would recommend this Universal Framing Carpentry to anyone looking for framing interior basement walls in Toronto. The owners were great, punctual, and did a really nice job on my basement walls. They were also really flexible with the time that they worked!

  8. Melissa Tozier
    Melissa Tozier says:

    It was such a great experience working with Universal Framing Carpentry. They have knowledgeable staff and their work speaks for themselves! The entire process of framing basement walls in Ontario from consultation to framing was really easy to manage and they even offer affordable framing rates.

  9. Ken L. Ford
    Ken L. Ford says:

    Universal Framing Carpentry is the best framing contractor in Canada. They are competitively priced, have excellent customer service and always go above and beyond for their clients. I highly recommend this company for anyone looking for a professional framing in Canada.


Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *